Skip to content
Stocks fit to your gun

Action Inletting

99% "PRESS-FIT INLET"

Action can be bolted to the stock with minimal handwork!
Minor adjustments to ensure clearance between the metal and wood may be needed in the bolt notch and rear tang area, usually requiring a relatively short amount of time.

96% "SEMI-INLET"

Semi-inletted stocks require proficient hobby woodworking skills, and the action needs to be hand inletted and fit to the stock.
Gun makes & models that are cut infrequently, or custom setups, usually fall into this category.
Please note: if you don’t find your actions listed below, please contact us as we may have an alternate pattern for your particular model.
We can also provide a stock with no inletting, suitable for custom sporting projects.

All Gunstock Styles & Wood Types Available For Actions Listed Below

Please Note: Action inlets highlighted in yellow below require approximately 10 weeks to produce in any Sporter or Target Style stock, and a $13.00 setup charge applies for special set up.



Anshultz 54 :
 ($25 set-up fee)

Browning: A-Bolt Long / Short/ Super short,  A-Bolt II, A-Bolt Medallion,(99% Press Fit Inlet)

 X-Bolt Long/Short/Super Short – Right & Left Hand  (96% Press Fit Inlet)

Browning: FN (99% Press Fit Inlet) (Same as the FN Commercial Mauser)

Browning: BBR Long, BBR Short ($25 set-up fee) “96% Semi-Inlet”

BRNO: 600, 602 ($25 set-up fee)“96% Semi-Inlet”
BRNO: CZ 550 “601” detachable magazine clip 7 7/8″ – 7.87″ (308, 243, 22.250) ($25 set-up fee)“96% Semi Inlet”
BRNO: CZ 550 “601” fixed magazine 7 5/16″ (243, 308) ($25 set-up fee)“96% Semi-Inlet”
BRNO: CZ 550 “600” fixed magazine 7 7/8″ – 7.87″ (270, 30.06) ($25 set-up fee)“96% Semi-Inlet”
BRNO: CZ 550 “602” fixed magazine 8″ (Heavy Magnum, 416 Rigby, 458 Win Mag, 338 Mag, 375 H&H Mag) ($25 set-up fee)“96% Semi-Inlet”

 

BRNO: CZ 452, 453 “96% Semi-Inlet”  455, 527 “99% Semi-Inlet” 

BSA Monarch Short, Monarch Long ($25 set-up fee) “96% Semi-Inlet”

 

Enfield: British P-14 (Straightened Guard), US P-17, Eddystone 1917, Winchester 1917, Remington 30’S, P-14 & 1917 (Deep Belly Guard/Straighten guard)……………………”99% Press Fit Inlet”

Eddystone: US 1917  (Same as the Enfield model)

 

Charles Daly: Mauser (Right and Left hand model)…..”99% Press Fit Inlet”

Charles Daly: Mini-Mauser……………“96% Semi-Inlet”                 

                        

Golden Eagle: 7000, Nikko ($49 set-up Fee)……………“96% Semi-Inlet”

            

Golden Bear …………..($49.00 set up Fee)   96% Semi-Inlet”

Herters: J9 Long, J9 Short……………“96% Semi-Inlet”

 

Herters: U9 Long, U9 Short ($25 set-up fee)……………“96% Semi-Inlet”

Howa: 1500 Long, Short, Mini (99% Press Fit Inlet)

Husqvarna: HVA Commercial small ring 7-13/16″ between screws, Swedish, Carl Gustov round receivers, Swedish ($25 set-up fee)…………“96% Semi-Inlet”

Industry Brand: QB78 Air Rifle………………”99% Press Fit Inlet”

 

Interarms: Mark X (99% Press Fit Inlet)

Interarms: Mini Mark X ………..“96% Semi-Inlet”  

 

Japanese Arisaka: M25 6.5mm (25 Jap), M31 7.7mm ( 31 Jap) (38 Jap) ………..“96% Semi-Inlet”

 

JC Higgins: M50, M53 ………..“96% Semi-Inlet”

 

JC Higgins: M51L ($25 set-up fee)………..“96% Semi-Inlet”

 

Kimber:    Model 82, Model 82G (single shot)  & 84 (22 Caliber), 84M (.308 Medium Length) 8400 WSM (Short) ($25 set-up fee)………..“96% Semi-Inlet”

Krag: US 1898 30-40………..“96% Semi-Inlet”

 

Krag: Norwegian, Jorgensen ($49 set-up fee)………..“96% Semi-Inlet”

 

1903 Greek Mannlicher ShoenaurSteel Floorplate Series before 1969 rotary ($25 set-up fee)………..“96% Semi-Inlet”

 

Marlin: Model 882 & 982 (all variations), 25MN, 17V, 917V,  “96% Semi-Inlet”

           :XL7,  XS7, X7 (short or Long action) Marlin 795………..“96% Semi-Inlet”

           : Marlin 795   “96% Semi-Inlet”

 

Mauser 98 – Long Action – Large Ring (7-13/16″ Between Lug Holes, 1-3/8″ Front Receiver Ring) Cut standard for an original long floorplate, and original stepped barrel.  A #1 or #3 contour barrel channel also available on request at no charge. (99% Press Fit Inlet)
98, 98 Large Ring, 98 German, M98 Persian, 1909 Argentine, 1909 Peruvian, 1910 Costa Rican, Czech VZ24-BRNO, 1924 Yugoslav (***1924 Yugo was made both Long 7-13/16 & Short 7-5/8″***), 1935 Peruvian, 1903 Turkish, 1908 Brazilian, 1938 Turkish 8MM

Mauser 98 Commercial – Long Action – Large  Ring (7-13/16″ Between Lug Holes, 1-3/8″ Front Receiver Ring) Cut standard for a commercial short floorplate, and a factory #1 barrel contour.  A #3 contour barrel channel also available on request at no charge. (99% Press Fit Inlet) 
Browning FN, Centurion, Husqvarna FN, Santa Barbara, Sako Magnum FN, Interarms Mark X, Musketeer, FN, FN 400

Mauser 98 – Long Action – Small  Ring (7-13/16″ Between Lug Holes, 1-1/4″ Front Receiver Ring) Cut standard for a short floorplate, small ring, and a small 1/2″ barrel channel.  (99% Press Fit Inlet)
98 Small Ring, G33/40 Small Ring, 98 Carbine Small Ring

Mauser 48 Short Action – Large Ring (7-5/8″ Between Lug Holes, 1-3/8″ Front Receiver Ring) Cut standard for an original stepped barrel.  A #1 or #3 contour barrel channel also available on request at no charge.  (99% Press Fit Inlet)
M48 Yugoslavian, M48A Yugoslavian, VZ500, M47, M52C, M24 Yugoslav (***1924 Yugo was made both Long 7-13/16 & Short 7-5/8″***)

Mauser 93,94,95,96 Series Short Action- Small Ring (7-5/8″ Between Lug Holes, 1-1/4″ Front Receiver Ring) Cut standard for an original stepped military barrel.  A #1 or #3 contour barrel channel also available on request at no charge. (99% Press Fit Inlet)
M93 Spanish, M94 Swedish, M95 Mexican, M95 Chilean, M96 Swedish, 98 Mexican Short, 1910, 1916, 1938

Mauser 1891 Argentine ………..”96% Semi-Inlet”

 

Siamese Mauser………..”96% Semi-Inlet” (13.00 set-up fee)

 

Mauser 2000 / 3000 ($25 set-up fee)………..”96% Semi-Inlet”

Montana: 1999 Long & Short, (Right & Left Hand) (99% Press Fit Inlet)
Barrel Channel Options (Factory Contours): Ultralite Sporter #1 Contour, Regular Sporter #3 Contour, Light Target #6 Contour

 

Mosin Nagant: M91, M30, M44, M38 (99% Press Fit Inlet)

Mossberg: 800A, 810, 100ATR, 4×4  ($25 set-up fee)………..“96% Semi-Inlet”
                  :100 ATR Long or Short action (need Caliber) “96% Semi-Inlet”

 

QB78: Industry Brand Air Rifle

Remington: Model 700ADL Long & Short (Right & Left Hand), Model 700BDL Long & Short (Right & Left Hand),  40X (Right & Left Hand–For Swept Bolt Version)   Single Shot variations are available for all models.(99% Press Fit Inlet)
Barrel Channel Options: “Mountain Rifle” Light Weight Barrel Contour, Standard Factory Barrel, Light Varmint Barrel & Heavy Varmint Barrel. 

Remington: 700 Muzzleloader (99% Press Fit)

Remington:  Model 7, M600 & M660 (approx. 8 weeks delivery), M722, M721, M725,

Remington: M30’S

Remington: M541, M581, M580 (single shot version)

Remington : M788 Short & Long

Remington: M798 No Bolt Notch or Safety Cut

 

Ruger: 77/50 In-Line Muzzeloader (99% Press Fit), 

 

Ruger: 77/17 (99% Press Fit), 77/22 (99% Press Fit) Ruger  77/22 Magnum

  

Ruger: 77/22 Hornet (99% Press Fit)

Ruger: 77/44   “96% Semi-Inlet”

 

Ruger: 77 Old Model with Tang Safety, Long & Short, Right & Left Hand (99% Press Fit)

 

Ruger:  Model 77 MK II (side safety) Long & Short, Right & Left Hand, (99% Press Fit) 

 

Ruger 10/22 & 10/22 Magnum (99% Press Fit)
Barrel Channel Options: Factory Barrel Contour & .920″ Straight Channel

Russian: Mosin Nagant M91, M30, M44, M38 (99% Press Fit Inlet)

Sako: L461 Vixen, L579 Forester, L61 Finnbear, A-I, A-II, A-III, A-IV, A-V………..“96% Semi-Inlet”

Sako: L46 Clip, L491, M591, M691, SAKO 75 #1, 75 #2, 75 #3, 75 #4, 75 #5 ($25 set-up fee)………..“96% Semi-Inlet”

Savage: 10, 11, 12, 13, 16, 110 Long & Short, 111, 112, 113, 116 (Right & Left Hand Versions) (99% Press Fit Inlet)

Savage: 10,11, 12 Single Shot Target model  (99% Press Fit Inlet) 

 

Savage: 12  F Class  Single Shot  3.45  (99% Press Fit Inlet) 

 

Savage : 10ML Muzzleloader (99% Press Fit Inlet) 

                

Savage:  340 “96% Semi-Inlet” 

Savage:    93FVSS-XP, 93FVSS, 93R17-BVSS, 93R17-FVSS, 93R17-FV (99% Press Fit Inlet)                     

Savage : 93 Single shot  (99% Press Fit Inlet) 

 

Schmidt Rubin K31: (Available only for Rollover, Monte Carlo, or Classic Styles in RH config  96% Semi-Inlet”

Smith & Wesson: 1500 (99% Press Fit Inlet)

Springfield : US 1903, US 1903 A3, US 22 Cal ………..“99% Semi-Inlet”

Tikka: T-3 (99% Press Fit Inlet),T3-X Model 695-(White Tail Hunter), Model 595 (White Tail Hunter)………..“96% Semi-Inlet”

 

Weatherby: Vanguard Long, Vanguard Short (99% Press Fit Inlet)

 

Weatherby: Mark V (13.00 set up), FN, Varmintmaster (49.00 set up) , Others……….“96% Semi-Inlet”

Weatherby: NEW Ultralite slimmer action full length (240, 243, 270, 280, 30.06 Caliber). ($25. set-up fee)……….“96% Semi-Inlet”

Winchester: Model 70 Long/Short/Super Short (Right & Left Hand), Model 70 & 670/770 Blind Magazine Long/Short/Super Short (Right & Left Hand), Model 70 Classic (New Pre-’64 Type) Long & Short (Right & Left Hand)(99% Press Fit Inlet)
Barrel Channel Options: Featherweight Barrel, Standard Factory Barrel, Heavy Varmint Barrel.  

Winchester: Model 70 Pre-War, Model 70 Pre-1964 (99% Press Fit Inlet), M52C – Clip, M52D – Single Shot, US 1917, M54……….“96% Semi-Inlet”-

Questions?

Get more info

Get answers to the mostly commonly asked questions about our stocks.

Join the club

Sign up for updates and specials

Want to know when the our newest products are released? Waiting for that perfect color to go on sale?
Join our mailing list below and be the first to know about new products and specials.

Mini Cart 0

Your cart is empty.